马头洗选厂集控系统技术改造实践

    Technical upgrading of the centralized control system of Matou Coal Washery

    • 摘要: 为了解决马头洗选厂集控系统抗干扰能力弱、就地与集中控制切换不便及设备"偷停"问题,结合现场实际生产要求,提出增加信号隔离、提升二次回路电压及采用光纤通讯;并通过集中和就地两种方式的无扰切换,将半集控升级为全集控。生产实践表明:在对集控系统改造后,系统抗干扰能力提高,通讯质量得到提升,能够保证全厂设备在集控状态下正常运转,为实现高质高产、减员增效、节能降耗提供了有力保障。

       

      Abstract: The centralized control system of Matou Coal Washery is found to have the troubles of being low in anti-interference capability, inconvenient in switching over between local and centralized control and unexpected sudden stop of equipment. Following an analysis of the specific operation requirements, the work is made on the upgrading of the control system from a semi-centralized to an all centralized mode, through intensification of signal isolation, increase of the voltage of the secondary loop, adoption of fibre communication and realization of interference-free switching-over between centralized and local control modes. Practice shows that the application of the upgraded control system has led to higher anti-interference capability, much improved communication effect of the system and normal operation of all the washing equipment. This provides, therefore, a strong guarantee for the realization of high-quality high-output operation, reduction of labour force, increase of efficiency, energy conservation and reduction of energy consumption.

       

    /

    返回文章
    返回